LPG/CNG Injecton Rail FLIPPER

Excellent quality, at an attractive price. It is a solid injection rail from the mid-price shelf.

In the product range, the FLIPPER Injecton Rail is placed between the ALEX RAIL-001 Rail and the flagship Barracuda injector. It is available in 3 and 4-cylinder versions.

The FLIPPER has a new design of the pistons and a compact housing. Thanks to the use of a smaller and lighter piston, forces acting on it are much weaker. A modern design combined with experience in the production of injectors guarantees the reliability and speed of the injector.

The seals are made of special fluorinated rubber (FKM) compounds. The use of the proprietary vulcanization process makes the rubber elements remain flexible for longer, without breaking. This directly translates into having the same fuel doses, even over a long period of use of the injector. 

Quality that doesn't disappoint.

The FLIPPER injection rail is manufactured and tested in accordance with the requirements of the American standard SAE J1832:2016, created specifically for the standardization of production and measurements of petrol injectors. The standard assumes uniformity in the assessment and measurement tests carried out on injectors used in gasoline engines.

High-quality materials, attention to details and multiple tests have resulted in achieving good parameters and a long time of failure-free operation.

Set elements

Set elements

Set elements
  • Injection rail

  • Calibration nozzles

  • Nozzles for the intake manifold

  • Gas inlet connection

  • Handles for fixing the rail

  • Plug

Video presentation

Specification

  • Available in 3- or 4-cylinder versions
  • Removable calibration nozzles allow smooth regulation of gas flow and injector efficiency (from 20 to 50 HP per cylinder)
  • Completely new piston design
  • Compact housing
  • Materials with high magnetic permeability and high saturation induction
  • Standard AMP SuperSeal connector
  • Seals made of specially designed fluorinated rubber compounds (FKM)
  • Working temperature from -40 to 120°C

 

Technical data

Static flow at 1,0 bar

[Nl/min]

120 ± 2

Nozzle diameter

[mm]

max. 2,8

Coil resistance

[Ω]

2,0 ± 5%

Opening time

[ms]

2,3

Closing time

[ms]

1,5

Min. peak current

[A]

≤ 3,0

Min. hold current (PWM=25%)

[A]

≤ 1,5

Operating working pressure

[bar]

0,2 ÷ 4,2

Max. working pressure

[bar]

4,5

Operating temperature

[°C]

-40 ÷ 120

Operating voltage range

[V]

8 ÷ 16

Warranty

[km]

60 000

Life span

[cycles]

> 200 mln

Connector

 

AMP SuperSeal

LFR @ T=20 ms

 

> 31

WFR @ T=20 ms

 

> 40

 

Product codes

C077-30-20-01-00

INJECTION RAIL FLIPPER 3C WITH EQUIPMENT

C077-40-20-01-00

INJECTION RAIL FLIPPER 4C WITH EQUIPMENT

Product Reviews

Files to download

  • pdf
    Comparison Table of ALEX injectors (Super B, Barracuda, FLIPPER, RAIL-001)
    Size: 396.84 KB
    Published: 2024-02-05
  • pdf
    E8 110R-0311418 – RAIL-002 / FLIPPER CNG Injection Rail
  • pdf
    E8 67R-0211417 – RAIL-002 / FLIPPER LPG Injection Rail
  • pdf
    Injector Nozzle Selection Table (Super B, Barracuda)
    Size: 80.34 KB
    Published: 2024-02-05
  • svg
    Logo FLIPPER
  • pdf
    Product Data Sheet FLIPPER
  • pdf
    Recommended Method of Installing Injectors (Super B, Barracuda)
    Size: 7.80 MB
    Published: 2024-02-05
  • pdf
    Static Flow Table (Super B, Barracuda, FLIPPER, RAIL-001)
    Size: 193.31 KB
    Published: 2024-02-06