LPG/CNG Controller ALEX OPTIMA nano

controller for engines with simple and advanced multipoint fuel injection systems

ALEX OPTIMA is the first Polish LPG system which meets the requirements of stringent EURO 6 emissions standards.

ALEX OPTIMA nano controller is the most advanced computer unit controlling the sequential gas injection, in the ECU class with 24-pin link. This LPG/CNG controller is designed for vehicles with a simple and extensive multipoint fuel injection systems. The innovatory algorithm of OPTIMA nano controller, precisely adjusts the dose of gas to the operating conditions and engine load in the full range of his work, thus reducing gas consumption.

The connection of a standard OBD interface gives installers the ability to collect OBD map correction, injection time map of RPM and collector pressure and precise regulation of injection times, the RPM, collector pressure, temperature and gas pressure – it is a unique solution in this class of controllers.

The main advantages

The main advantages

The main advantages
  • Support for 3/4 cylinder engines

  • Compact design

  • Quick assembly - 24-pin connector

  • OBD Support (with ELM interface)

Quick calibration of the ALEX OPTIMA System

Specification

  • Up to 4 cylinders
  • Above-average savings
  • The innovative control algorithm
  • Intuitive system usage
  • Precise oscilloscope
  • Protection of the petrol injectors PB (exhaust valves protection)
  • Ability to set smart post-injection
  • Compact size and quick installation
  • Day&night system
  • Additional RPM corrections
  • Additional corrections of the reducer temperature
  • Additional corrections of the gas temperature
  • Additional corrections of the gas pressure
  • Additional corrections of gas injectors opening
  • Oscilloscope to observe the parameters of the installation
  • Looped petrol injection service
  • Compatibility with the VALVETRONIC type engines
  • Compatibility with the Wankel type engines
  • Compatibility with the standard engines
  • Compatibility with the turbo engines
  • Compatibility with different types of petrol injection control
  • Compatibility with different types of gas injectors
  • Compatibility with different types of gas level sensors
  • Gas injector heating
  • The ability to determine the maximum engine load and RPM while working on gas
  • Function reminding about periodical service of gas installation
  • “Quick start” function
  • Full anti-circuit and anti-overloading protection
  • Semiconductor emulation
  • 3D gas and petrol maps
  • Automatic detection of petrol injection type
  • Operating on LPG and CNG fuel
  • The ability to download the RPM signal from the camshaft level sensor
  • The ability to download the RPM signal from the crankshaft level sensor
  • The ability to download the RPM signal from injectors impulse
  • The ability of a permanent switch off of particular gas injectors
  • The ability of emergency starting on gas
  • Lambda probe service
  • Lasting errors memory
  • Fuels overlapping
  • Operating on external AFR probe
  • Injector switching strategies during fuel transitions
  • RPM decay time setting
  • Quick switch off of the LPG/CNG installation
  • The ability to display the history of changes in the controller
  • Signaling errors and status messages
  • Petrol secondary injection option
  • Automatic detection of OBD reports (with ELM interface)
  • Controller with OBD operating (with ELM interface)
  • Monitoring of OBD parameters (with ELM interface)
  • Adaptation based on the ECU correction reading (with ELM interface)
  • Operating on reverse OBD correction (with ELM interface)
  • Erasing selected errors OBD2/CAN (with ELM interface)
  • Simplification of application view
  • Editable ranges of gas injection time (table of injection time in rotation function)
  • Additional correction map depending on MAF
  • Additional correction map depending on the collector pressure
  • Leaning on a cold engine
  • Signalling the work on petrol
  • Signalling a worm reducer
  • Universal Fuel pressure Emulator
  • Meets the emissions standard EURO 6
  • Designed and manufactured in Poland

Product Reviews

Files to download

  • pdf
    Comparison of ALEX OPTIMA controllers (PICO, nano, EXPERT)
    Size: 120.08 KB
    Version: 2023
    Published: 2023-01-10
  • pdf
    Connection diagram OPTIMA nano controller
    Size: 759.17 KB
    Version: 2022
  • pdf
    Instalation and programming manual OPTIMA nano and EXPERT controllers
  • pdf
    Leads description OPTIMA nano controller
  • svg
    Logo ALEX OPTIMA nano
  • pdf
    Product Data Sheet ALEX OPTIMA nano